Video 823: NCE DCC Mini-Panel Automatically Control 3-Rail O-ga. Train Point-to-Point

(This page last updated 11/07/2019)

VIDEO LINK:  ___ (not done yet)

  • Note: Previous Video #822 has an “S Ga. Preview” of the two button system operating (a “forward” and a “reverse” button that the public could control), at this link:  youtu.be/lzhWvoTdcVY?t=1590    (this link takes you to the 26:30 point in the video)

GOOGLE DRIVE ALBUM #823 – has sketches & drawings for Videos #820 thru #823.   (Note that the drawings need to be renumbered from 820 to 823)

zline1blue-strobe2

This page contains images and links for Video #823 “NCE DCC Mini-Panel Automatically Control 3-Rail O-ga. Train Point-to-Point” — using 2 detectors. (Note drawings say #820; the numbers need to be updated.)

  • The below drawing #823-1 shows the overall wiring drawing.
  • The below Drawing #821-2 shows the connection of the Z-Stuff DZ-1011 Block Signal Detector and DZ-1008 Relay.
  • The below Drawing #823-3 shows the Flow Chart for the “Mode 1” Manual operation, whereby the public can control the loco’s forward-reverse direction with a pushbutton.

Dwg. 821-1 – Click this image to open it LARGER

Dwg. 821-2 – Click this image to open it LARGER

Dwg. 821-3 – Click this image to open it LARGER

Dwg. 821-4 – Click this image to open it LARGER

Dwg. 821-5 – Click this image to open it LARGER

The above image shows PART of the command file.  See the PDF directory (link at top) for the COMPLETE file in PDF format.